# Why Use Point & Figure Charts?

Why Point & Figure Charts?

Point & Figure (P&F) charts are one of the simplest and clearest ways to determining the best time to buy and sell shares. The P&F system represents one of the oldest approaches to share market trading. This method takes the technical analysts approach while monitoring supply and demand for each share and the charts are designed for long-term trading so that the time and cost of trading shares is minimal.

How are Point & Figure Charts Constructed?

In P&F charts both axis are dependent on price rather than one being based on price and the other on date. The key unit in a P&F chart is the point, or unit of price. The point size may change in value along the y-axis to provide consistent and relative price movements. This means that a if a share ranges between \$8 and \$12, the point size may be 10 cents when the share is below \$10 and 20 cents when above. An ‘X’ is placed on the chart to indicate an upward movement and an ‘O’ indicates a downward movement. The graph gets its x-axis dimension via three point reversals. A three-point reversal occurs when either:

1. The price is on a downwardtrend, then picks up three or more points, or
2. The price is on an upwardtrend, then falls by three or more points.

When a three-point reversal occurs, the chart is continued in the next column. Thus every column must contain at least 3 ‘O’s or ‘X’s and constitutes movement in one direction only. The attraction of this method is that insignificant movements in the market are filtered out.

Now, let’s look at a typical example (Broken Hill). The point size for these values is 20 cents.

The data previous to this showed an upward trend and constituted a series of ‘X’s in the column. This column peaks at \$15.38 on 10/02/98. The last ‘X’ is drawn in the \$15.20 square because the share has not yet reached \$15.40. This means that for a three point reversal to occur the price must drop by at least 60 cents, or three points. This happens on 13/02/98 with a low of \$14.35. When this occurs the chart is moved to the next column and ‘O’s are placed in the \$15.00, \$14.80, \$14.60 and \$14.40 rows. An ‘O’ is not placed in the \$14.20 row because the price has not yet reached \$14.20. The price does, however, fall to \$14.05 on 16/02/98 and another ‘O’ is place in the \$14.20 row. The chart falls once again to \$13.98 on 17/02/98. When this occurs yet another ‘O’ is added to the chart, this time in the \$14.00 row. The very next day the chart rises to \$14.62 and this constitutes a three-point reversal. The chart is moved to the next column and ‘X’s are placed in the \$14.20, \$14.40 and \$14.60 rows. No more ‘X’s are added to this column because the share performs another three point reversal on the 25/02/98 and three ‘O’s are place in the appropriate points in the next column. The chart should now look like the this (first column of chart incomplete):

Dates are added to the chart by replacing an ‘X’ or an ‘O’ by the month number. When the year changes it is written at the bottom of the chart. You will notice that the year labels can be vary in position as the charts movement is dependent on price and not on date. The suspension of trading on particular shares is shown by a ‘?’ in the charts.

The Wyckoff Method

The Wyckoff method is a special type of point & figure chart. It uses a single box reversal instead of the more common three point reversal. It also varies from the standard point & figure chart because it can contain both X’s and O’s in the same column. This will occur whenever there is only a single entry made in a column. For example if we had a single X in a column followed by 3 O’s, the O’s will be displayed in the same column as the X. In a Wyckoff chart there must always be more than one entry in a column.

Let’s take an example. The box size for these values is \$1.00. Note that a Wyckoff chart can also use high and low data, but for clarity we have selected closing price data only.

On 11/02/98 the chart rose from \$55 to \$57. This resulted in 3 X’s being plotted in the first column. The very next day there was a pull back of one box to \$56. Because we are using a one point reversal, we move to the next column and plot the single O. The next day the price rises again to \$57. This again is a reversal, however we do not move to the next column because we have only made one entry in the current column. The upward movement continues until the chart reaches \$59 on 17/02/98. Continuing to plot the data in this fashion will produce the chart below:

Other than the two requirements described above, the Wyckoff point & figure chart uses the same principals as a standard three point reversal chart.

When analysing the charts to determine the best time to buy and sell shares, the following criteria must be evaluated:

1. Patterns
2. Trend Lines
3. Market Indicators
4. Price Objectives

Point & Figure Patterns

Double Top and Double Bottom Formation

Double Top and Double Bottom formations are the most basic of chart patterns. A Double Top is formed when a high is followed by a decline, which is then followed by a rise that exceeds the previous. A Double Bottom is formed in a similar fashion. As we will see later, most other formations are variations on this simple pattern. Generally, formations that consist of more than 3 vertical columns yield better results.

The Triple Top and Triple Bottom Formation

This pattern occurs when a series of 2 or more tops or bottoms is penetrated. Generally this is formed by 5 vertical columns, however it is possible for formation to be spread over multiple columns as shown below:

Both triangle formations consist of higher bottoms and lower tops, generally with all prices contained between the bullish support and bearish resistance lines.  The signals for the triangle formations are the first Double Top or Double Bottom signals.

The Bullish and Bearish Signal Formation

The significant feature of a bullish signal formation is a higher bottom followed by a higher top. This often indicates that demand has overcome supply. Consequently a lower top followed by a lower bottom forms a bearish signal formation. This often indicates that supply has overcome demand.

Bullish and Bearish Catapult Formations

A Bullish Catapult Formation consists of a Triple Top Buy Signal, a pullback that produces no bearish signal, followed by a new double top buy.  This formation has three distinct buy points: (i) the Triple Top Buy Signal, (ii) the bottom of the pullback (with a stop a bearish signal – if it should occur), (iii) the Double Top Buy Signal.  A Bearish Catapult Formation is the reverse situation.

Long Tail Down

Long Tail Down

A Long Tail Down must have at least twenty Os down.  A buy signal is given whenever there is a 3 box upside reversal.  A stop-loss can be placed where a double bottom sell signal may occur.

High and Low Pole Formations

A High Pole begins with at least 3 Xs above a previous top.  The formation is completed when there is a reversing column of Os that is at least 50% as long as the column of Xs.  This warns of a topping process.  The Low Pole is the reverse situation.

The Bullish Support Line

A bullish support line is drawn from the lowest point on completion of a significant downtrend and is extended up at a 45-degree angle as far right as possible. This line is predictive because it can be drawn as soon as the market has completed its downtrend. This line does not connect points as trend lines often do. An example of a Bullish Support Line is shown below:

Having drawn this, the theory is quite simple. Any sell signals given above this line should be disregarded. This means the share should not be sold until the first sell signal after the bullish support line has been penetrated.

The Bearish Resistance Line

The bearish resistance line is a very similar concept to the bullish support line. It is drawn from the highest point on completion of a significant uptrend and is extended downwards at an angle of 45 degrees as far right as possible. An example of a bearish resistance line is shown below:

Any buy signals given below this line should be disregarded. This means the share should not be purchased until the first buy signal given after penetration of the bearish resistance line.

Market Indicators

Before buying and selling shares, it is necessary to assess 2 market indicators:

1. The industry group to whichthe share is associated. The Australian Stock Exchange supplies indexfigures on about 45 different groups.
2. The market as a whole. Thisshould be assessed via inspection of the All Ordinaries, All Industrials,All Resources charts as well as overseas indices like the Dow Jones.

Shares should only be purchased when the market as a whole is bullish. Similarly, shares must be selected from industry groups that are bullish and acting better than the rest of the market.

Price Objectives

There are two ways to project price: vertical and horizontal counts.

Vertical Count

Buy – Assuming a 3-box reversal, count the number of Xs in the first move up that produces a buy signal. Multiply this number by 3 and add the product to the lowest X in the column on the right. Sell – Reverse for a sell signal.

Bullish Vertical Count

5 X’s up

3 * 5 = 15 and 35 + 15 = 50  50 is the upside objective

Bearish Vertical Count

4 O’s down

4 * 3 = 12 and 52 – 12 = 40 40 is the downside objective

Horizontal Count

Buy – Assuming a 3-box reversal, count the number of boxes across the base of the formation that has given a buy signal. Multiply that number by 3 and add it to the price associated with the lowest X. Sell – Reverse for a sell signal.

Bullish Horizontal Count

4 boxes across 3 * 4 = 12 and 35 + 12 = 47 47 is the upside objective

Bearish Horizontal Count

3 boxes across 3 * 3 = 9 and 52 – 9 = 43 43 is the downside objective

Guidelines

Below are some useful guidelines to consider when buying stocks (reverse for selling stocks):

1. Buy stocks when thepercentage of bullish stocks has a column of Xs, especially on an upturnfrom below 10%.
2. Buy stocks whose sectorrelative strength chart has a column of Xs.
3. Buy stocks whose relativestrength chart has a column of Xs.
4. Buy stocks that are abovetheir Bullish Support and Bearish Resistance Lines.
5. Buy stocks that have somekind of bullish signal.
6. Consider buying some stocksthat are in a pullback, but whose relative strength has a column of Xs.
7. Look to take profitswhenever the percentage of bullish stocks is above 70% (and especiallyabove 80%) and have a column of Os.
8. Rising bottoms are strongerthan flat bottoms.
9. Based on a research study,the strength of bullish signals in order are: Triple Top, Spread TripleTop, Bullish Signal, Double Top